90
Operation and configuration
00053157
g
Field
Remark
Configure
by press button
If the router or access point that is used
for establishing a connection supports the
press button method:
Click "Start PBC" and press the
PBC button to connect to the
router or access point.
You can also press the Reset/WPS button
7
on the back of the device. Only press
the button briefly. Pressing the Reset/WPS
button longer than 5 seconds resets all
device settings to factory default settings.
Configure by
PinCode
If the access point has already generated
an eight-digit PinCode, enter the code
here and click "Start PIN" to connect.
Wireless connection
Select "Activate" if you wish to operate
the device via WLAN and "Deactivate" to
switch the function off.
Network type
Select the network connection type here:
infrastructure for connection to a router/
access point.
Adhoc for direct connection to another
WLAN-capable device.
Summary of Contents for 53157
Page 57: ...113 Appendix 00053157 g...
