Hama 55455, Operating Instruction

24

CD Ripping

Ripping to the USB device or the mp3 player are basically the same. Connect the USB device or mp3 player fi rst before 

ripping.

Note: CD Ripping function only supports CDDA discs.

Ripping CD to USB or mp3 Player

1.   During CD playback, press REC on the remote to activate the Ripping Menu.

2.   Select one of the menu itmes using the up/down arrow buttons. Press the left/right arrow buttons or OK to change 

the setting.

Speed

High speed ripping mode can save time when ripping from CDs. Select 1x(normal speed) or 2x(double speed). Press the 

down arrow button to move to the next menu item.

Note: No sound will be heard during ripping if you select 2x.

Source

You can select to rip one track(TRACK), the whole disc(DISC) or programed tracks(PROG TRACK).

Press OK to confi rm selection. Press the down arrow button to move to the next menu item.

Destination

Select the destination of the ripped fi les. You can select to rip the fi les to the mp3 player (the Lyra mp3 Player) or your 

USB device (USB). Note: CD Ripping function does not support ripping fi les to Mulit Card Reader via USB port.

Start Ripping CD

Highlight 

START

 and press 

OK

 to start ripping.

Note: “NO USB DEVICE” will be displayed if no USB device is 

connected to the unit.

“NO PROGRAM TRACK” will be displayed if no program list is 

created.

“USB DEVICE IS FULL” will be displayed if the USB device is 

full.

“USB WRITE PROTECT” will be displayed if the USB device is 

writeprotected.

You should switch off the write protection fi rst.

The screen on the right appears when ripping start. The

fi rst progress bar represents the progress percentage of the current ripping track while the second progress bar

represents the total percentage. The percentage of both bars will be identical if there is only one track to rip.

Note: You can select ripping speed even after ripping is started by pressing the left/right arrow buttons.

“DEVICE REMAIN” indicates the total remaining time of the Lyra mp3 Player or the USB device.

To stop ripping during the process, highlight STOP button and press OK.

When ripping has fi nished, press REC to quit the ripping menu.

00055455bda2.indd   Abs2:24

00055455bda2.indd   Abs2:24

07.08.2007   15:07:18 Uhr

07.08.2007   15:07:18 Uhr