24
9. Temperature buzzer set
At normal time displaying mode, hold
DOWN
button for
seconds to enter into temperature buzzer setting. Press
DOWN
or
UP
button to turn on/off the temperature
buzzer. Press
SET
button to confirm and go to next
setting. The setting order is temperature on/off
➞
highest limit
➞
lowest limit. The range of the highest
limit is -49°C to 70°C. The range of the lowest limit
is -50°C to 69°C. If there is no more operation for 30
seconds, it will save the existing setting and turn to
normal displaying or press
SET
button again to confirm
the setting.
Press
CHANNEL
button to choose CH1/CH2/CH3. Hold
CHANNEL
button for second to clear up the record in
3 channels.
10. WEATHER FORECAST AND TENDENCY
There are 4 weather icons in the LCD screen which can
be displayed in any of following combinations:
sunny
partly cloudy
cloudy
rainy
11. Radio signal search
RC signal searching condition:
At below status, the clock will start searching RC signal
automatically. The icon of
will flash.
• After transmitter connecting with clock when powering
on or resetting.
• Hold
UP
button for seconds
• Every date at 2:05 am, 3:05 am, 4:05 am and 5:05
am.
• It will last about 3-8 minutes. If receive successfully
one time, it will not search signal again until next
day at 2:05 am. It will start search RC signal at 2:05
am every day. Press
UP
button once to exit RC signal
searching.
12. Receive icon:
• Signal search:
flash at frequency of 1Hz
• Weak signal: tower stillness with 1 flashing arc
• Strong signal: tower stillness with 1-3 flashing arc
• Received successfully: full display
When receive DST, the DST symbol will display on the
LCD screen.
13. REMOTE FREQUENCY FUNCTION
The transmission range is about 60 meters from the
transmitter to the weather station (in open area). The
weather station should receive the temperature data with
3 minutes after set-up. If the temperature data is not
received 3 minutes after setting up, please check below:
• The distance of weather station or transmitter should
be at least 5~6.5 feet (1.5~2 meters) away from
any interfering sources such as computer monitors
or TV sets.
• Avoid putting the weather station onto or in the
immediate proximity of metal window frames.
• Using other electrical products such as headphones or
speakers operating on the same signal frequency.
• Neighbors sing electrical devices operating on the
same signal frequency can also cause interference.
• The clock will not search for the signal from outdoor
transmitter if there is no signal received from outdoor
transmitter in 3 channels after powering on or
resetting.
• The clock will not search for the signal from outdoor
transmitter anymore if there is no signal received in 1
hour. It will display
---
.
14. CHANNEL & SENSOR OPERATION
• The weather station is up to maximum 3 sensors.
• Remove the battery cover of sensor and slide
CHANNEL
switch to CH1/CH2/CH3 (when using
additional sensors, make sure each sensor is assigned
a different
CHANNEL
number,
ONLY 1
sensor in box
normally)
• Make sure you put each sensor in your desired area.
• Press
CHANNEL
key to switch the channel between
1\2 and 3 and collect temperature information for
guidance.
15. Care and Maintenance
Only clean this product with a slightly damp, lint-free
cloth and do not use aggressive cleaning agents.
Summary of Contents for 99123148 WS-710
Page 2: ...2 3 1 ...