Thank you
Thank you for purchasing the Bluetooth Stereo Head-
set. The Headset is designed for audio
device users to have a high quality stereo sound and a
wireless operating range up to 10 meters.
Please read the instruction manual to make the best
use of the Headset. We hope you will enjoy
the high quality stereo sound and power of Bluetooth
wireless technology.
Box content
- Bluetooth stereo headset
- Bluetooth stereo adapter
- Power Adapter
- User guide
Overview
1.Play on/off button
2. Volume button
3. Power switch
4. Pairing button / track wheel
5. Microphone
6. Charging port
7. Collapsible headband
8. Power adapter
9. Stereo adapter
10. Control button
Getting Start
1.
Charge battery
-
Connect the power adapter to the T-connector.
-
Connect the stereo headset and adapter to the T-
connector
-
Plug the power adapter into an electrical outlet.
Note:
For the first time use, it takes 4 hours to fully charge the
batteries and 2 hours afterward.
With the batteries fully charged, the use time is around
8 hours and the standby time is
around 160 hours.
2.
Power On
-
Use the power switch to turn on the power
3.
Plug into the audio device
-
Plug the audio connector into the audio port of the
audio device.
4.
Pairing
-
Press and hold the pairing wheel on the stereo
headset for 6 seconds until the blue and red LEDs
flash alternately.
-
Press and hold the control button on the stereo
adapter for 6 seconds until the blue and red LEDs
flash alternately.
5.
Volume Control
-
Use the volume buttons on the stereo headset to
adjust volume.
Note:
Since output voltage of audio devices varies from one
to another, for users to have best sound
quality, the stereo adapter offers users 2 volume
modes, high volume mode and normal mode.
6.
Set volume mode
Normal volume mode
-
Press and hold the control buttons on the stereo
adapter for 1.5 seconds to disconnect the stereo
adapter from the audio device.
-
Single click on the control button will reconnect
the stereo adapter to the audio device and set
the stereo headset to normal volume mode.
High volume mode
-
Press and hold the control buttons on the stereo
adapter for 1.5 seconds to disconnect the stereo
adapter from the audio device
-
Double click on the control button will reconnect to
the stereo adapter to the audio device and
set the stereo headset to high volume mode.
Note:
- For iPod, normal mode is preferred.
-
For Sony PSP or Creative MP3 player and others,
high volume mode is preferred.
Use with mobile phone
1.
Pairing
Press and hold the pairing/track wheel button on the
stereo headset for 6 seconds to set the stereo
headset into pairing mode. The blue and red LEDs will
be flashing when the stereo headset is in
pairing mode. To properly perform pairing procedure on
your mobile phone, please refer to the
manual of your mobile phone for its own pairing
instruction. This device name is set to be "Bluetooth
Stereo Headset". If you are asked to enter pin-code
during pairing, please enter 1234 . (Note: The
"1234" is default pin-code pre-stored in this Stereo
headset.)
2.
To make a call
-
Dial out the number from your mobile phone.
-
Voice is automatically transferred to the headset.
3.
To receive a Call:
1.
When there is an incoming call, press the answer
button to answer the call and the audio channel
will be switched to the mobile phone.
2.
Press the Volume control button to adjust the
volume.
3.
When finish talking, press the answer button to end
the call and the audio channel will be switched
back to the audio device.
L
L
User Manual
1.5 sec
Single click
Double click
00057185bda 24.03.2006 8:12 Uhr Seite 8
