5
• If the alarm is triggered, the alarm symbol is
displayed and an alarm will sound.
• Press
UP
(19),
DOWN
(22),
SET
(20) or
ALARM to stop the alarm.
Note – Snooze function
• While the alarm signal is sounding, press
the
SNOOZE
button (18) or
LIGHT
button
(21) to activate the snooze function. The
icon begins to flash on the display. The
alarm signal will stop for approximately 10
minutes, after which it will sound again.
• Press
UP
(19),
DOWN
, (22),
SET
(20) or
ALARM to stop the snooze function and
the alarm.
Temperature (Celsius/Fahrenheit)
• Press the
UP
button (19) to switch between
°C and °F for the temperature display.
• The weather station indicates a trend as to
how the values for the indoor and outdoor
temperature are likely to develop over the
next few hours.
Display
Trend
Increasing
Constant
Decreasing
Atmospheric pressure (hPA/inHg)
Note – Snooze function
• While the alarm signal is sounding, press
the
SNOOZE
button (18) or
LIGHT
button
(21) to activate the snooze function. The
icon begins to flash on the display. The
alarm signal will stop for approximately 10
minutes, after which it will sound again.
• Press
UP
(19),
DOWN
, (22),
SET
(20) or
ALARM to stop the snooze function and
the alarm.
Note
Like all measurement values, atmospheric
pressure is subject to a certain measurement
tolerance.
• Press and hold the
Set
button (20) until the
time begins to flash.
• Press the
Set
button (20) repeatedly until hPA
or inHG appears on the display.
• Press the
UP
button (19) or
DOWN
button
(22) to change the unit to inHG or hPA.
• The weather station gives a current value
trend for atmospheric pressure.
6.3 Weather trend display
Based on changes in the atmospheric pressure
and the data saved, the base station is able
to make weather forecasts for the next 12 to
24 hours.
Note – Weather trend display
The weather forecast function is not available
during the first few hours of operation because it
requires data that is collected during operation.
The weather trend and the current weather are
displayed using four different symbols (1):
Symbol
Weather
Sunny
Slightly cloudy
Cloudy
Rainy
6.4 Moon phases
The base station displays the current moon phase
with the following symbols:
New Moon
Full Moon
Waxing
Crescent
Waning
Gibbous
First quarter
Last quarter
Waxing
Gibbous
Waning
Crescent
6.5 Backlight
• If you press the
SNOOZE
button (18) or
LIGHT
button (21) in battery operation,
the display will light up for approximately
10 seconds.
• By repeatedly pressing the
SNOOZE
button
(18) or
LIGHT
button (21) in mains operation,
you can specify the brightness level of the
lighting and turn it off.
Summary of Contents for Color Edge
