26
12.1 BIuetooth
®
pairing
Make sure that your Bluetooth
®
capable terminal device
is on and Bluetooth is activated.
•
Enable Bluetooth
®
operating mode on the radio by
repeatedly pressing [
MODE
]:
Press and hold
[
MODE
]
•
Open the Bluetooth
®
settings on your terminal device
and wait until
DIT1000MBT
appears in the list of
Bluetooth devices found.
•
If necessary, start searching for Bluetooth
®
devices
on your terminal device.
•
Select
DIT1000MBT
and wait until the radio is
listed as connected in the Bluetooth
®
settings on
your terminal device.
•
Your terminal device is also shown as connected
on the radio display.
•
Start and control audio playback using the
controls of the terminal device.
Note – Bluetooth
®
password
Some terminal devices require a password in order
to connect to another Bluetooth
®
device.
•
If your terminal device requests a password for
connection to the radio, enter
0000.
12.2 Automatic Bluetooth
®
connection
(after successful pairing)
•
Terminal devices already paired with the radio are
automatically saved on the radio.
•
If you are pairing the terminal device with the
radio for the first time, proceed as described in
12.1. BIuetooth
®
pairing.
•
Make sure that your Bluetooth
®
capable terminal
device is on and Bluetooth is activated.
•
Press [
MODE
] repeatedly until the terminal device you
would like to pair with the radio is shown on the display.
•
The devices will be automatically connected.
•
If necessary, open the Bluetooth
®
setting on your
terminal device and select
DIT1000MBT
.
•
Start and control audio playback using the controls
of the terminal device.
Note – Connection impaired
After the radio and terminal device have been paired, a
connection is established automatically. If the Bluetooth
connection is not established automatically, check the
following:
•
Check the Bluetooth
®
settings of your terminal device
to see whether
DIT1000MBT
is connected. If not,
repeat the steps listed under Bluetooth
®
pairing.
•
Check whether your terminal device and the radio
are less than 10 metres apart. If not, move them
closer togehter.
•
Check whether obstacles are impairing the range.
If so, move the devices closer together.
13. Sleep
The radio has a sleep function, after a defined time the
radio switches to standby mode.
•
Repeatedly press
[
SLEEP
]
on the remote control to set
the desired time interval (Sleep OFF/15/30/45/60/90/120
minutes).
Alternatively, set the time interval from the main menu:
[
MENU
]
Main menu
Sleep
•
After the defined time the radio switches to
standby mode.
•
Press
[ ]
, to turn the radio back on.
•
If a time interval is already activated, you can change
or disable it at any time by again pressing
[
SLEEP
]
on the remote control.
Note
There is a separate setting for the backlight when the
timer (snooze) is activated. For example, it can be set to
be dimmer than in normal operation.
15.9. Backlight.
