3
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
Risk of electric shock
This symbol indicates product parts energized with a
dangerous voltage of sufficient magnitude to constitute
a risk of electric shock.
2. Package Contents
•
Digital radio DR10
•
Quick guide
•
AC/DC Adapter
3. Safety Notes
•
The product is intended for private, non-commercial use
only.
•
Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
•
As with all electrical devices, this device should be kept
out of the reach of children.
•
Do not drop the product and do not expose it to any
major shocks.
•
Do not operate the product outside the power limits given
in the specifications.
•
Keep the packaging material out of the reach of children
due to the risk of suffocation.
•
Dispose of packaging material immediately according to
locally applicable regulations.
•
Do not modify the device in any way. Doing so voids the
warranty.
Risk of electric shock
•
Do not open the device or continue to operate it if it
becomes damaged.
•
Do not use the product if the AC adapter, adapter
cable or power cable is damaged.
•
Do not attempt to service or repair the device
yourself. Leave any service work to qualified experts.
Warning – Batteries:
•
When inserting batteries, note the correct polarity (+
and - markings) and insert the batteries accordingly.
Failure to do so could result in the batteries leaking
or exploding.
•
Do not allow children to change batteries without
supervision.
•
Do not mix old and new batteries or batteries of a
different type or make.
•
Remove the batteries from products that are not
being used for an extended period
•
Do not short-circuit batteries.
•
Do not charge batteries.
•
Do not throw batteries in a fire.
•
Keep batteries out of the reach of children.
4. Getting started
4.1 Switching the device on
•
Connect the power cable to a properly installed power
socket.
Warning
•
Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
•
Disconnect the product from the power supply using
the on/off switch – if this is not available, unplug the
power cord from the socket.
•
Wait until the radio initialisation procedure has finished.
•
Press the [POWER] button to switch the radio on.
Summary of Contents for DR10
Page 3: ...Preset Enter Power Vol Vol Menu Info FM DAB V V A B 1 7 8 10 6 9 11 2 3 4 5 DC IN 13 14 12 ...
Page 4: ......
Page 5: ......
Page 63: ...59 ...
