9
8.2 Alarm clock
The radio allows you to set two different
alarm times.
•
Configuration of alarm 1 and alarm 2 is identical. They
allow two alarm times to be saved independently.
•
Press [Settings] (3) to access the settings menu.
•
Turn [Volume/Select/Navigate] (9) to navigate to the
‘Alarm clock’ menu item.
•
Confirm your selection by pressing [Volume/Select/
Navigate] (9).
•
Now select the desired setting and confirm your selection
by pressing [Volume/Select/Navigate] (9).
Time:
First choose the hour, then the minute at which the
alarm is to activate.
Duration:
Select the duration of the alarm.
Source:
Set whether you wish to be woken by an alarm tone
(buzzer), FM or DAB.
Mode:
Choose when the alarm is to activate:
Daily – Once – On weekdays – On weekends
Date:
First choose the day, then the month and year when the
alarm time begins.
Volume:
Select the volume for your alarm. With this setting, the
volume of the radio when you last operated it is irrelevant.
Mode:
Select whether you want to activate or deactivate the
alarm.
Note
•
When using DAB as an alarm tone, it is important to
have a stable radio connection at the alarm time. If
this is not the case, the signal tone (buzzer) is used as
the alarm tone.
•
It is recommended that you allow automatic time
updates. This ensures that the time is updated even
after disconnection of the power supply – for example,
in the case of a power failure.
8.3 Lighting
The backlight can be configured separately for each
operating mode (operation, standby).
•
Press [Settings] (3) to access the settings menu.
•
Turn [Volume/Select/Navigate] (9) to navigate to the
‘Lighting’ menu item. Confirm your selection by pressing
[Volume/Select/Navigate] (9).
•
Now select the desired setting in the respective mode
and confirm your selection by pressing [Volume/Select/
Navigate] (9).
8.4 Factory Reset
•
Press [Settings] (3) to access the settings menu.
•
Turn [Volume/Select/Navigate] (9) to navigate to the
‘Factory settings’ menu item.
•
Confirm your selection by pressing [Volume/Select/
Navigate] (9).
Confirm the following prompt with
Yes
to reset the radio
to the factory default settings. All settings made previously
are deleted.
Note
•
Resetting to the factory default settings can solve
some problems and malfunctions.
•
However, all settings made previously, such as
favourites and station lists, are permanently deleted.
8.5 Info / Software version
To have the radio display information about its software,
proceed as follows:
•
Press [Settings] (3) to access the settings menu.
•
Turn [Volume/Select/Navigate] (9) to navigate to the
‘SW version’ menu item.
•
Confirm your selection by pressing [Volume/Select/
Navigate] (9).
