14
4. Pairing the headset:
(1) The headset must be powered off before you begin to initiate the
pairing. Press the button till the blue and red indicators begin to
fl ash alternatively. The headset is now in pairing mode.
(2) Initiate the pairing process of your Bluetooth mobile phone. (Please
refer to the manual of your mobile phone.)
(3) When asked the
PIN code
, please enter
“0000”
to successfully
complete the pairing process.
(4) When the pairing process is successfully completed, the blue
indicator will fl ash. The headset is now in standby mode.
(5) After the headset is successfully paired with your mobile phone. In
some case, you will still have to connect the headset with your
mobile phone. (Please refer to the mobile phone manual.)
(Please refer to Fig.5.)
Note:
(1) If the headset is not in pairing mode, your mobile phone can not fi nd
the headset. Please set the headset into pairing mode before you
start to pair the headset with your phone.
(2) If no pairing is possible over a period of time (Aprox. 1 minute), the
pairing process will be stopped. You have to repeat STEP 4 to
successfully complete the pairing.
5. Answering or ending calls:
When the headset is paired with your phone, and when there is an
incoming call, you will hear a musical ring. Then press the button
to answer the call. When there is a call in session, you can press the
button to end the call.
Note:
Because of the different design of some mobile phones, a
disconnection may automatically happen even when the headset is
powered on. In this case, the headset will not ring if there is an
incoming call. Press button for 1 second to re-connect the headset
with the mobile phone for an incoming call. (Please refer to Fig.6.)
6. Making calls:
(1) Voice-dialing:
Press the button. After hearing a beep sound, say the name of the
person you recorded on your phone. (The availability of this function
depends on the design of the mobile phone you use. Please refer to the
manual of your mobile phone for the voice-dialing function. )
(2)Dial the phone number on you mobile phone as you normally do. The
sound will be transmitted to the headset automatically.
7. Changing the volume of the Headset:
(1) Press the button to increase the listening volume of the headset.
(2) Press the button to decrease the listening volume of the
headset.
(3) You can also adjust the volume from your mobile phone. Please
refer to the manual of your mobile phone.
15
Fig. 5
blue
red
Fig. 6
re-
connect
2R198206bda.indd 16-17
2R198206bda.indd 16-17
25.07.2008 9:44:12 Uhr
25.07.2008 9:44:12 Uhr
