2
G
Operating instruction
Controls and Displays
1. LCD-Display
2. Hanging Hole
3. Battery compartment
Thank you for choosing a Hama product.
Take your time and read the following
instructions and information completely. Please
keep these instructions in a safe place for future
reference. If you sell the device, please pass these
operating instructions on to the new owner.
Package Contents
•
Electronic weather station
•
Outdoor sensor
•
These operating instructions
Safety Notes
•
The product is intended for private, non-
commercial use only.
•
Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
•
Do not drop the product and do not expose it
to any major shocks.
•
Do not open the device or continue to operate
it if it becomes damaged.
•
As with all electrical devices, this device
should be kept out of the reach of children.
•
Dispose of packaging material immediately
according to locally applicable regulations.
•
Do not modify the device in any way. Doing so
voids the warranty.
Feature
•
Time display
•
Alarm and snooze function with blue backlight
•
Low power reminding of outdoor transmitter
•
The displaying range of indoor temperature:
0-50°C
•
The displaying range of outdoor temperature:
-40-60°C
•
Radio controlled function with DCF edition
•
DST time
•
Record the max and min temperature of both
indoor and outdoor
•
Operated with 2xAAA batteries (not included)
for clock and 2xAAA batteries (not included)
for transmitter
Powering on
Open the battery compartment cover and insert
2xAAA batteries according to the correct polarity
showed in the compartment. After powering on,
the clock will take about 3 minute to connect
with the outdoor transmitter. After that, it will
start search radio signal. It will stop searching
signal till successfully received or 7 minutes later.
Time setting
At normal time displaying mode, keep pressing
SET
button for seconds till entering time setting
mode, and the setting digit will flash. Press
▼
or
▲
button to adjust. The setting order is time
zone
➞
hour
➞
minute
➞
exit. If there is no
more operation for 20 seconds, it will save the
existing setting and turn to normal displaying or
press
SET
button again to confirm the setting.
Alarm and snooze setting
at normal time displaying mode, press
ALARM
button once to display the alarm time.
At the mode of alarm, press
▲
button once to
turn on the alarm function and the signal of
is showed on the screen. Press
▼
button again
to turn off the alarm function.
At the mode of alarm, keep pressing
ALARM
button for seconds till entering alarm setting
mode and the setting digit will flash. Press
▼
or
Summary of Contents for EWS-700
Page 2: ......
Page 3: ...2 3 1...