3
▲
button to adjust. The setting order is hour
➞
minute
➞
exit. If there is no more operation for
20 seconds, it will save the existing setting and
turn to normal displaying or press
SET
button
again to confirm the setting.
The alarm sound will last for 2minutes and it will
change as below:
0-10 seconds: BI per second
11-20 seconds: BI BI per second
21-30 seconds: BI BI BI per second
>30 seconds: Keep BI
•
When alarm ring is on, press
button to
turn off the sound. The signal of
will flash
and it will be on again after 5 minutes.
•
When the alarm ring is on, press any other
button to cancel the alarm sound. The alarm
will be on again after 24 hours.
Temperature
Press
▼
button to change the temperature in
°C or °F.
Press
MAX/MIN
button to display the max and
min temperature record.
Keep pressing ‘
▲
button for seconds to
re-connect with the transmitter.
Radio signal search
RC signal searching condition:
At below status, the clock will start searching RC
signal automatically. The RC icon will flash.
•
After transmitter connecting with clock when
powering on or resetting.
•
Hold
▼
button for seconds
•
Every date at 1:00 am, 2:00 am, 3:00 am,
4:00 am and 5:05 am.
•
It will last about 3-8 minutes. If receive
successfully after 3:00 am, it will not search
signal again until next day at 1:00 am. It will
start search RC signal at 1:00 am, 2:00 am
and 3:00 am every day. Press
UP
button once
to exit RC signal searching.
Receive icon:
•
Signal search: tower icon flash at frequency
of 1Hz
•
Weak signal: tower stillness with 1 flashing arc
•
Strong signal: tower stillness with 1-3
flashing arc
•
Received successfully: full display
•
When receive DST, the DST symbol will display
on the LCD screen.
Remote frequency function
The transmission range is about 60 meters from
the transmitter to the weather station (in open
area). The weather station should receive the
temperature data with 3 minutes after set-up. If
the temperature data is not received 3 minutes
after setting up, please check below:
•
The distance of weather station or transmitter
should be at least 5~6.5 feet (1.5~2 meters)
away from any interfering sources such as
computer monitors or TV sets.
•
Avoid putting the weather station onto or in
the immediate proximity of metal window
frames.
•
Using other electrical products such as
headphones or speakers operating on the
same signal frequency.
•
Neighbors sing electrical devices operating
on the same signal frequency can also cause
interference.
•
The clock will not search for the signal from
outdoor transmitter if there is no signal
received from outdoor transmitter in 3
channels after powering on or resetting.
Summary of Contents for EWS-700
Page 2: ......
Page 3: ...2 3 1...
