10
11
Settings with Windows XP
Open „Sounds and Audio Devices“ from your control
panel.
Click „Advanced...“ under „Speaker settings“
Select „Desktop stereo speakers“ and click „OK“.
Your sound settings are now optimised for this loudspea-
ker system.
If you cannot place the satellites, as was described, so
that they are at equal distances from your head, you can
now balance the volume between the two satellites.
To do this, click „Speaker volume...“ under „Speaker
settings“
You can control the level for the various output channels
here. Increase or decrease the level for the right and
left satellites as you need, then click „OK“ to confi rm the
changes.
Operation and sound settings
Switching the loudspeakers on
Use the on/off switch on the subwoofer to switch the
loudspeaker system on and off.
Volume
You can control the volume using the control on the
satellite.
Sound settings
In addition to the volume control, the satellites also
have a control for low frequencies (bass). First, set the
loudspeakers to normal room volume and then adjust the
bass to the levels you desire
Headphone output
When you attach headphones to the satellites, the audio
signal to the loudspeaker is automatically interrupted
and the signal is only played back on your headphones.
You can continue to use the volume control to control the
volume on your headphones.
00052800bda.indd Abs3:10-Abs3:11
00052800bda.indd Abs3:10-Abs3:11
15.02.2008 11:44:30 Uhr
15.02.2008 11:44:30 Uhr
All manuals and user guides at all-guides.com
all-guides.com
