28
Operation
MP20
g
Setting data storage device checking
Select the submenu "System" and the menu item "Scan storage
device" as described in the section
"Opening the setup menu
and navigating"
.
The selected menu item with the corresponding setting values (set-
ting options) appears on the screen.
You can set how the device is to react to connection of a USB data
storage device in the "Scan memory" menu item. The following op-
tions are available:
Auto scan on
Select this option if the table of contents of a
USB storage device is to be automatically read
during connection or when the device is swit-
ched on.
Auto scan off
Select this option if the content of a USB storage
device is not to be automatically read during
connection or when the device is switched on.
Rescan
storage device
Select this option if the content of a connected
USB storage device is to be rescanned.
Stop scanning
storage device
Select this option to cancel reading of the con-
tents.
Use the ▼▲ navigation buttons to select the desired settings
option.
Press the
Enter button to confirm selection and activate the
setting.