130
Setup and connection
PRN45HD
g
Y/Pb/Pr COMPONENT OUT: Component output
The component output Y/Pb/Pr transmits only video signals
(picture) . For the audio transmission, you have to make an ad-
ditional audio connection between the appliance and the con-
nected TV set .
Connect the 3-coloured plugs (red/blue/green) to the Y/Pb/PR
jack (component output) of the appliance as shown in the figure.
Connect the 3-coloured plugs to the Y/Pb/PR jack (component
input) of your TV set as shown in the figure.
NOTE
For audio transmission (audio signal) you can use either the
►
A/V OUT jacks (audio-video output) or the S/PDIF COAXIAL
output (coaxial audio output) or the OPTICAL jack (optical audio
output) .
When you have made the connection via the component output Y/Pb/
Pr, you can play back the files from the appliance on the screen of the
connected TV or of another video appliance .
