145
Operation
PRN45HD
g
Setting the video system
Select the sub-menu "Video" and the menu item "Video system"
as described in chapter
"Opening setup menu and naviga-
tion"
.
The selected menu item with the corresponding setting values (setting
options) appears on the screen .
Under menu item "Video system" you can adapt the TV stand-
ard of the outgoing video signal (the colour transmission system)
to the connected TV set . The following TV standards (systems for
colour transmission) are available here: HDMI Auto, NTSC, PAL,
480p, 576p, 720p 50 Hz, 720p 60 Hz, 1080i 50 Hz, 1080i 60 Hz,
1080p 50 Hz, 1080p 60 Hz .
Select the desired TV standard using the
▼▲ navigation but
-
tons .
Press the
Enter button to confirm the selection .
SD video system
Select the sub-menu "Video" and the menu item "SD video
system" as described in chapter
"Opening setup menu and
navigation"
.
The selected menu item with the corresponding setting values (setting
options) appears on the screen .
Under menu item "Video system" you can adapt the TV standard of
the outgoing video signal (the colour transmission system) to the con-
nected TV set . The following TV standards (systems for colour trans-
mission) are available here: NTSC and PAL .
Select the desired TV standard using the
▼▲ navigation but
-
tons .
Press the
Enter button to confirm the selection .
Activate 1080P 24 Hz mode
Select the sub-menu "Video" and the menu item "1080p 24 Hz"
as described in chapter
"Opening setup menu and naviga-
tion"
.
The selected menu item appears on the screen .
Activate/deactivate this setting using the
▼▲ navigation buttons
.
Press the
Enter button to confirm the selection .