8
9
Troubleshooting
Symptom
Possible Couse
Action
Keyboard and/or Mouse
Not Responding
Keyboard/Mouse needs to be
reset.
Hotkey sequence input incorrectly
Switch needs to be reset
Unplug the keyboard/mouse from the Console
Keyboard Port, then plug it back in
Resend the Hotkey command - press and release
each key in the sequence individually
Turn off the computers; wait 5 seconds; turn the
computers back on
Video Problems
Resolution and/or Refresh rat set too
high
Select a lower resolution and/or bandwidth
Specifi cations
Functions
S2100
Computer Connections
2
Port Selection
Hotkey
Keyboard
Console Video
Mouse
Connectors KVM-Ports Keyboard/Mouse
Video
1 x USB Typ A Female (black)
1 x HDB-15 Female (blue)
1 x USB Typ A Female (black)
2 x USB Typ A Male (black)
2 x HDB-15 Male (blue)
LEDs Selected
2 (green)
Cable Length Computers
1.2 m
Emulation Keyboard/Mouse
USB
Video
2048 x 1536; DDC2B
Scan Intervall
5 Seconds
Operating Temp.
Environment Storage Temp.
Humidity
Housing
Weight
Dimensions (L x W x H)
0 -50°C
-20 -60°C
0 -80% RH, Non-condensing
Plastic
0.40 kg
2.40 x 7.30 x 7.20 cm
Operation
1. Hotkey Port Selection
All hotkey port switches begin with tapping the Ctrl key twice.
[Ctrl] [Ctrl]
2. Invokes Auto Scan Mode
Starts Auto Scan. Press and release the [Left Shift] key, and then press the [Right Shift] key.
[Left Shift] [Right Shift]
Scan Interval
Sets the Auto Scan interval to n second intervals - where n is a number from 1 – 4.
[Left shift] [Right shift] [n]
Note:
The n stands for the number of seconds that the focus dwells on a port before switching to the other one.
Replace the n with a number between 1 and 4 when entering this hotkey combination. (See the table, below.)
Scan Interval Table
n
Scan Interval
1
3 Sec.
2
5 Sec. (default)
3
10 Sec.
4
20 Sec.
Terminates the hotkey mode and the automatic switch-over
[Esc] or [space bar]
Hotkey key confi guration
When you have activated the hotkey mode [Strg] + [F12], press one of the following buttons to invoke the corresponding function:
Key
Operation
[F1]
Recognizes and stores the hardware sided keyboard environment.
[F2]
Uses the Mac compatible keyboard environment.
[F3]
Uses the Sun compatible keyboard environment.
[F4]
Prints out the current assignment for hotkeys, keyboard platforms
and language setting.
R > [Enter]
Resets the hotkey settings to the standard values.
00052348bda.indd Abs2:8-Abs2:9
00052348bda.indd Abs2:8-Abs2:9
15.05.2008 10:43:10 Uhr
15.05.2008 10:43:10 Uhr
