4
• Connect the included Micro-USB cable to the USB port on the power pack (
OUT 5V/1A
) and to the
Micro-USB port on your terminal device (mobile phone, smartphone, etc.).
• The Micro-USB charging/connecting cable included may not be suitable for the USB connection on
your terminal device. In this case, use the USB cable that was included with your terminal device.
• Charging begins automatically. The status LEDs show the remaining capacity when the Power Pack
is charging.
• The current battery status of your terminal device will appear on this device.
• Press and hold the button on the power pack to stop charging and to switch the power pack off.
The status LEDs should switch off.
• The Power Pack will automatically switch off if it is not connected to a terminal device.
Note – Optimised charging
Optimised charging means that the Power Pack recognises the connected terminal device and
supplies it with the optimal current to minimise charging time. Please note that the maximum
power output of the power pack is 1000 mA.
5. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do not use aggressive cleaning agents.
6. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no warranty for damage resulting from
improper installation/mounting, improper use of the product or from failure to observe the operating
instructions and/or safety notes.
7. Technical Data
Micro-USB input
5V
1A
USB-A output
5V
1A
Battery type
3.7V/Li-po (high density)
Min. capacity
5000mAh/18.50Wh
Typ. capacity
5100mAh / 18.87Wh
Usable Capacity*
3402mAh@5V
1A
* The usable capacity is the capacity that can be drawn from the output sockets, measured at 5V output voltage and a draw current of 1A.
