3
4. Operation
4.1 Charge the Spotlight Presenter
If the following symbol appears on the display:
the battery status is low. Connect the supplied USB
charging cable to the micro-USB port (5). Connect the
free plug on the USB charging cable to a suitable USB
charger.
A complete charging cycle takes about 2 hours.
Warning – rechargeable battery
•
Only use suitable charging devices or USB connections to
charge the product.
•
Do not use defective chargers or USB ports and do not
attempt to repair them.
•
Avoid storing, charging and using in extreme temperatures
and at extremely low atmospheric pressures (such as at
high altitudes).
•
Charge regularly (at least quarterly) during periods of
prolonged storage.
4.2 Quick start
1. Plug the receiver into an available USB port on your
device.
2. After automatic driver installation, the removable data
medium opens
TF card
Dongle
3. Install the required Spot-Pointer software
4. Switch the Presenter on following successful
installation (7).
The following symbol now appears in the task bar:
Note
If the Presenter is switched off, or if the receiver is not
connected to the computer, this will be indicated by a
colourless symbol.
5. Function types
1. Spot illumination mode
2. Magnifying glass function
3. Digital laser pointer
• Pressing the o button (3) twice allows you to toggle
between the function types
• By pressing and holding the o button (3), you
can change the size of the laser pointer, spot and
magnifying glass with the two function keys (1) and (2)
