C11440-10C Ver.1.2
2. CHECK THE CONTENTS OF PACKAGE
When you open the package, check that the following items are included before use. If the
contents are incorrect, insufficient or damaged in any way, contact your local dealer without
attempting to operate the camera.
C11440-10C camera
1
AC adaptor
1
Power supply cord for AC adaptor
1
Lens mount cap
*attached to the camera
1
C11440-10C Before Use
1
C11440-10C Instruction manual
CD
1
[Option]
CameraLink interface cable
A10514-05
Note
•
The cable listed in option is highly recommended for use with the camera. The camera
system may not confirm to CE marking regulation if other type of cable is used with.
3. INSTALLATION
Avoid using or storing this camera in the following places
•
Where the ambient temperature might fall below 0
°
C or rise above 40
°
C
•
Where the temperature varies extremely
•
In direct sunlight or near a heater
•
Where the humidity is 70 % or more or where there is dripping water
•
Close to a strong source of magnetism or radio waves
•
Where there is vibration
•
Where it might come into contact with corrosive gases (such as chlorine or
fluorine)
•
Where there is a lot of dust
Do not block ventilation openings
•
To prevent overheating in the camera’s interior, do not wrap the device in
cloth or other material, or in any way allow the camera’s ventilation ports to
become blocked. If the camera is being operated in an enclosed
environment, ensure clearance of at least 10 cm from both the intake and
exhaust vents when setting up.
4
