15
8.2
Connecting the relay board
(1)
Connecting method of FPC Cable
The FPC cable can be locked by inserting it deep into the FPC connector and tilting the actuator.
The FPC cable can be disconnected by raising the actuator. When tilting the actuator, apply force
evenly. When removing, do not use any tools and use your fingertips to lift up the center part.
Fig.8
Precautions when tilting the actuator
Fig.9
Precautions for raising the actuator
(2)
FPC Cable Connection Guidelines
Be careful not to mistake the front and back of the FPC cable. The side written “RELAY BOARD” is
the front.
controller side
head side
Fig.10 FPC Cable Connection Guidelines
Put no effort
in one place
Apply equal
force to the
whole
Apply force to the
center of
End Only
Without (any)
force
