3
3.1
Warning
■
Handling the Power Cable
Turn off the power before installing or removing cables, and then hold the connectors.
Do not operate the product with wet hands or mount or remove the cable. There is a risk of electric
shock or malfunction and it is very dangerous.
■
Cables
Do not damage, or place heavy objects on cables. Doing so may damage cables, resulting in electric
shock or fire.
■
ground grounding of the power supply
To prevent electric shock or malfunction, always plug the power cord into a socket with a grounding
terminal using a 3-wire cord. 3 When connecting to a 2-wire power supply using the -2 adapter, be sure
to ground the ground wire.
■
Location
To prevent fire, install the device in a well-ventilated area free of dust, water, and fire.
■
Removing the LCOS-SLM Controller Cover
Do not remove the LCOS-SLM controller cover. There is a risk of electric shock and it is very
dangerous. Do not disassemble or modify the product. Removing the cover is not covered by product
warranty.
■
Be careful of reflected light
LCOS-SLM modulates the phase of light incident from a laser or other light source, reflects it, and
outputs it. Be careful where the reflected light of the LCOS-SLM goes. In some cases, it may affect
human body such as blindness. Take appropriate measures such as using a beam damper to block
light or wearing protective glasses to prevent light from entering the eyes.
■
Watch out for the diffracted light
LCOS-SLM generates unwanted reflected light due to the effect of pixel diffraction. Pay particular
attention to the effects of diffracted light when a high-intensity laser is incident on the LCOS-SLM.
In some cases, it may affect human body such as blindness. Take appropriate measures such as
cutting diffracted light and wearing protective glasses corresponding to the wavelength used.
■
If you notice anything unusual
Do not use the product in a condition where smoke, odor, abnormal sound, or heat is generated. Doing
so may cause fire or electric shock. If this happens, turn off the power switch immediately. Please
contact our company after confirming that there is no abnormality. Please do not repair by yourself as it
is dangerous.
■
Do not apply vibration or impact
Excessive vibration or shock may damage components or cause misalignment, resulting in fire or
electric shock.
■
Use only the supplied AC adapter/power cable
This device is designed to be connected through the AC adapter and power cable supplied with the
product. Otherwise, fire or electric shock may result. For details, see "Power Cable/AC Adapter" on
page 13.
■
Do not let foreign objects or water get inside
Fire or electric shock may result if flammable materials, metals, or moisture enter the product.
