Hame 55454 Operation Instructions Manual Download

Page: 11 / 26

Level adjustment and surround channel
level expectation

Even though you adjust the surround channel to
be as loud as the others on the test signal, on
actual program material the surround channel is
usually much lower than the front. Don’t readjust
the surround level; program producers use
surround for subtle atmospherics and ambience,
and only rarely for special effects.

THE REMOTE CONTROL

Navigating through menus

Use the direction buttons to navigate through
the menus. Press the OK button on the remote
control to confi rm your selection.

Remote control functions in DVD/CD mode

ON•OFF

- Switches the unit on and off.

DVD

- Selects the DVD mode.

TUNER

- Selects the TUNER and selects between FM/AM.

USB

- Selects the USB.

AUX

- Selects the AUX1 and AUX2.

0-9

- Number entry. Press 1 through 5 to directly access

a disc in the disc tray. You must press STOP before

pressing a number to access a disc in the disc tray
when in playback mode.

CLEAR

- Quit the current setting manually from

the TV screen without saving change.

INFO

- Accesses the Info menu.

TITLE

- Accesses the disc menu.

DISC MENU

- Accesses the disc menu during

playback. Turn PBC on/off for VCD disc.

- Confi rm your selection.

MUTE

- Mutes and restores the sound.

SETUP

- Enter Setup menu.

RETURN

- In DVD/CD mode, returns to the

previous menu.

VOL +/-

- Adjusts the sound volume.

CH +/-

- Directly accesses the next or previous

chapter (DVD) or track (CD). Selects programmed
stations in TUNER mode.

REV

- Starts reverse accelerated play or reverse

slow motion.

PLAY

- Starts playing a disc.

FWD

- Starts forward accelerated play or forward

slow motion.

STOP

- Stops playback.

PAUSE

- Freeze frame, frame advance or slow motion.

AUDIO

- Accesses the audio function.

ANGLE

- Accesses the camera angle function for

DVD disc. Accesses Wipe Down/ Wipe Up/Center
In/Center Out/Blind Up/Blind Down/Random
transition function for JPEG (Slide Show).

ZOOM

- Accesses the Zoom function.

SUBTITLE

- Selects the subtitle languages or turns

subtitle off (if available).

MEMORY

- Stores station in tuner mode.

SLEEP

- Enters sleep mode and selects sleep time.

SUBWOOFER

- Selects among subwoofer output

levels (soft/balance/strong/powerful).

RANDOM

- Turns on/off random playback on

CDDA discs.

REPEAT

- Accesses the repeat function.

EQ. LEVEL

- Selects among EQ/BASS/TREBLE

mode. Adjusts BASS/TREBLE using the left/right
arrow buttons.

SURROUND

- Changes the Surround sound setting.

Note:

Record function is not available in
this model.

00055454bda_GB.indd Abs2:12

06.08.2007 16:07:53 Uhr

Summary of Contents for 55454



























Search results

Summary of Contents for 55454

Reviews:

Related manuals for 55454

Brands by name

Popular brands

Hame 55454, Operation Instructions Manual

Search results

Summary of Contents for 55454

Reviews:

Related manuals for 55454

Brands by name

Popular brands