13
Remote control functions in Tuner mode
TUNER
- Selects the TUNER and switch between
FM/AM.
VOL+/-
- Adjusts the sound volume.
MUTE
- Mutes and Restores the sound.
TUNER +/-
- Tunes down and up the radio frequencies.
MEMORY
- Stores a station.
CH+/-
- Selects programmed stations.
AUDIO
- Selects between Stereo and Mono mode
for Tuner (FM).
Using the remote to Navigate through
On-Screen Menus
No matter what on-screen display you’re using
(the DVD player’s menu, the Info Display that
appears during playback, or a disc’s menu), you’ll
use the same buttons on the remote control to
navigate through the on-screen display; the four
arrow buttons and the OK button.
Use the arrow buttons on the remote to move
through on-screen menus in the direction of the
arrow button (to move right, press the right
arrow button, etc.). The arrow buttons are used
to highlight an option. Once highlighted, press
the OK button to select the option that is
highlighted.
Inserting batteries in the Remote Control
• Do not mix different types of
batteries or new and old
batteries. Do not use
rechargeable
batteries.
• In order to avoid any risk of
explosion,
observe
the
polarities indicated inside the
battery compartment. Replace
only with the type of batteries
specifi ed. Do not dispose of
them in a fi re or recharge
them.
• If you are not using the remote
control for a long period of
time, remove the batteries.
Please respect the environment and
prevailing regulations. Before you
dispose of batteries or accumulators,
ask your dealer whether they are
subject to special recycling and if they
will accept them for disposal.
PLAYING DISCS - BASIC FUNCTIONS
Compatible discs
• DVD
• DVD-R,DVD-RW, DVD+R, DVD+RW
• CD
• CD-R, CD-RW
Compatible formats
• DVD, VCD (Video Compact Disc), SVCD (Super
Video Compact Disc), JPEG
• CD, mp3, WMA
See page 24 and 25 for more information about
discs and compatible formats.
Regional coding
Your DVD player has been designed to process
regional management information stored on DVD
discs. The regional code for your player is 1. Discs
that have a different regional code will not play.
Operating the DVD receiver
1. Turn on your television set.
2. Press the ON•OFF button on the remote or the
ON/STANDBY button located on the DVD
player’s front panel. Press the DVD•CD button
on the remote control.
Loading discs
You can load up to 5 discs into your DVD player,
but you do not have to fi ll all the slots in the disc
tray for the player to work. You can load any
kind of compatible disc in any combination
(DVDs, CDs, VCDs). The player will read the data
on the disc and play it accordingly.
1. Press OPEN•CLOSE DISC 1/2/3/4/5 to open the
desired disc tray. (For example, press
OPEN•CLOSE DISC 1 to open disc tray 1)
2. Insert a compatible disc into the disc slot,
making sure it is fully in place.
3. When you’re fi nished loading discs, press
OPEN•CLOSE DISC 1/2/3/4/5to close the disc
tray. (For example, to close tray 1, press
OPEN•CLOSE
DISC
1)
4. Repeat steps 1-3 to load discs in all the disc trays.
Playing discs
Load a disc or discs as shown above and press the
OPEN/CLOSE button. The disc tray closes.
00055454bda_GB.indd Abs2:13
00055454bda_GB.indd Abs2:13
06.08.2007 16:07:54 Uhr
06.08.2007 16:07:54 Uhr
