Hame 55454, Operation Instructions Manual

14

The DVD Player reads the fi rst disc’s table of
contents, and then one of three things happens
depending on how the disc was programmed:
•   The disc starts playing.
•   The disc menu appears (for DVDs and VCDs).
  One of the options will be to start playing the
  disc. Highlight that option and press OK.

Types of Menus

•   Disc menu – The appearance and contents of
  this menu varies according to the type of disc
  you have inserted. It is separate from the Setup
 menu.
•   Info menu – The player’s Info menu appears at
  the bottom of the screen while the disc is
  playing. Press the INFO button on the remote
  to toggle the Info menu on or off.

•   Setup menu – Press the SETUP button to access
 this 

menu.

Basic Playback Operations

Playback

Switch the DVD player and the TV set on.
1. Press the OPEN•CLOSE DISC 1/2/3/4/5 button on
  the front of the player to open the desired disc tray.
2. Put the disc in with the printed side up (in the
  case of a single-sided disc).
3. Press again to close the disc tray. Play starts
  automatically, or the disc menu appears. If the
  disc menu appears, select the Play option to
 begin 

playback.

4. To skip to the next disc, press DISC SKIP on the
  front panel. To directly access a disc by number,
  press STOP fi rst and press the corresponding
  number on the remote (for example, to go to

  disc 3, press 3 on the remote).
5. Press STOP to stop playback.

Accelerated play

While the disc is playing, press the REVERSE or
FORWARD button one or more times to vary the
speed and direction of the accelerated play. Press
PLAY to resume normal playback.

Note:

•   If PBC is switched off during VCD disc
  playback or DVD disc playback, the player
  stores the point where playback was
  interrupted when you press STOP. If you
  press PLAY again, playback resumes from
  this point. To stop playback completely or to
  start again from the beginning, press STOP
  twice. If the player is left in STOP mode for
  more than fi ve minutes without any user
  interaction, a screen saver is activated. At
  the end of 30 minutes without any user
  interaction, the player switches off
 automatically.
•   REV or FWD function is not available for 
 WMA 

disc.

Pause

While the disc is playing, press PAUSE once for
freeze frame. Press PLAY to resume normal
playback.

Frame advance

1. Press PAUSE twice. STEP is displayed.
2. Press PAUSE to move forward one frame at a time.
3. Press PLAY to resume normal playback.

Variable slow motion

1. While the disc is playing, press the PAUSE
  button once. PAUSE is displayed.
2. Press REV or FWD a number of times to vary the speed.
3. Press PLAY to resume normal playback.

Changing chapter/track

While the disc is playing, press the CH+/- button
to go immediately to the next or previous
chapter, or to the next or previous track.

00055454bda_GB.indd   Abs2:14

00055454bda_GB.indd   Abs2:14

06.08.2007   16:07:55 Uhr

06.08.2007   16:07:55 Uhr