23
4. Press the right arrow button to enter rating
limit
sub-menu.
5. To change the rating limit, highlight the
RATING option and press the right arrow
button. Select the rating limit using the
up/down arrow buttons and press OK.
6. Rating limits take affect only when the player is locked.
Change Password
1. Select the Set Password option and press OK.
2. Enter your current password or super password
9688 and press OK.
3. ‘Correct Password’ is displayed.Press OK. “Enter
New Password” is displayed.
4. Enter your new password and press OK.
Password is changed.
Misc
With this menu, you can restore the default settings.
Note:
This option allows you to restore
the player’s setting to the original factory
settings. Any changes you have made to the
player’s settings will be reverted back to the
original settings, except the password.
1. Select the Misc option in the main menu using
the up/down arrow buttons and press the right
arrow button to highlight ‘Use Default Settings’.
2. Press OK and press the left/right arrow buttons
to select Yes and press OK.
3. Default settings are restored.
ADDITIONAL INFORMATION
Troubleshooting
The unit does not switch on.
• Make sure it is plugged in.
• Press the ON/OFF button on the remote control
or the ON/STANDBY button on the front of the unit.
The device switches off spontaneously.
• The device switches off automatically when it is
in STOP mode for more than 30 minutes
without any user intervention. Switch it on again.
• It might be impossible to read the disc.
• Insert the disc with the printed side facing up.
• Check that the disc can actually be played by
this device (see page 24 and 25).
• Check that the disc’s regional code matches the
player’s regional code. This player’s regional
code
is
1.
• Clean the disc.
There is no picture.
• Check you have switched on the TV set.
• Check the connections (see pages 7, 22 and 24
and Quick Start Guide).
• Select the AV input assigned to the player on the TV.
The picture is of poor quality (with snow or lines).
• Check the connections (see pages 7, 20 and 21
and Quick Start Guide).
There is no sound or the sound is of poor quality.
• Check the connections (see page 8).
• Make sure the speakers are connected.
• Make sure the MUTE function is not on.
No surround sound.
• Check the speaker confi guration in the Setup
menu (see Audio on page 21).
I can’t fi nd my fi le in the WMA/mp3/JPG listing.
• Make sure the fi lename is valid (see page 25 and 26).
The remote control does not work or works
only intermittently.
• Check that batteries are inserted or change them.
• Aim the remote control at the unit. The
infrared beam must not be blocked or interrupted.
• Check that the remote control is confi gured to
control the device you are trying to operate with it.
00055454bda_GB.indd Abs2:23
00055454bda_GB.indd Abs2:23
06.08.2007 16:08:00 Uhr
06.08.2007 16:08:00 Uhr
