Accessories supplied:
Operator’s Manual and power cable, Software
Optional accessories:
HZ33/HZ34 Test Cable 50 Ω (BNC-BNC)
HZ24 Attenuators 50 Ω 3 / 6 / 10 and 20 dB
HZ42 19” Rackmount kit 2RU
HZ20 Adapter plug
HO870 USB Interface
HO880 IEEE-488 (GPIB) Interface
12.5 MHz Arbitrary Function Generator HM8150
Valid at 23 °C after a 30 minute warm-up period
Frequency
Range:
10 mHz to 12.5 MHz
Resolution:
5 digit, max. 10 mHz
Accuracy:
± (1 digit + 5 mHz)
Temperature coeffizient:
0.5 ppm/°C
Aging:
2 ppm/year
Waveforms
Sine wave
Frequency range:
10 mHz to 12.5 MHz
Amplitude:
20 mV
pp
– 20 V
pp
(open circuit)
Harmonic Distortion
@
1 V
pp
:
f ‹ 500 kHz:
-65 dBc
500 kHz
≤
f ‹ 5 MHz:
-50 dBc
5 MHz
≤
f
≤
12.5 MHz:
-40 dBc
Total Harmonic Distortion
@
1 V
pp
:
f ‹ 100 kHz:
typ. 0.05%
Spurious (Non-Harmonic)
@
1 V
pp
:
f ‹ 500 kHz:
-65 dBc
500 kHz
≤
f
≤
12.5 MHz:
-65 dBc + 6 dBc/octave
Square wave
Frequency range:
10 mHz to 12.5 MHz
Amplitude:
20 mV
pp
– 20 V
pp
(open circuit)
Rise / fall time:
‹ 10 ns
Overshoot:
‹ 5 % (U
out
≤
200 mV)
Symmetry:
50 % ± (5 % +10 ns)
Pulse
Frequency range:
10 mHz to 5 MHz
Amplitude:
10 mV...+10 V or -10 mV...-10 V
Rise / fall time:
‹ 10 ns
Pulse width:
100 ns to 80 s
Duty cycle:
max. 90 %
Sawtooth
Frequency range:
10 mHz to 25 kHz
Amplitude:
20 mV
pp
– 20 V
pp
(open circuit)
Linearity:
better than 1 %
Triangle
Frequency range:
10 mHz to 250 kHz
Amplitude:
20 mV
pp
– 20 V
pp
(open circuit)
Linearity:
better than 1 %
Arbitrary generator
Frequency range:
10 mHz to 250 kHz
Amplitude:
max. 20 V
pp
(open circuit)
Output rate:
40 MSa/s
Resolution:
X: 1024 (10 bit), Y: 1024 (10 bit)
or X: 4096 (12 bit), Y: 4096 (12 bit)
Inputs
Gate/Trigger:
BNC connector
Impedance:
5 kΩ II 100 pF
Max. input voltage:
± 30 V
Modulation Input:
BNC connector
Impedance:
10 kΩ
Max. input voltage:
± 30 V
Outputs
Signal output:
BNC connector, short circuit proof,
ext. voltage up to ± 15 V
Impedance:
50 Ω
Output voltage:
Range 1:
2.1 – 20 V
pp
(open circuit)
Range 2:
0.21 – 2.0 V
pp
(open circuit)
Range 3:
20 – 200 mV
pp
(open circuit)
Resolution:
Range 1:
100 mV
Range 2:
10 mV
Range 3:
1 mV
Setting accuracy (1 kHz):
Range 1:
± 2 %
Range 2:
± 3 %
Range 3:
± 4 %
3 % additional for pulse and square wave
Frequency response:
‹ 100 kHz
± 0.2 dB
0.1 – 12.5 MHz:
± 0.5 dB
Offset error:
Range 3:
± 50 mV
Display:
2
1
⁄
2
digits (LCD)
Trigger output:
BNC connector
Level:
5 V / TTL
Impedance:
50 Ω
Sawtooth output:
BNC connector
Output voltage:
0 to 5 V, synchronous to sweep
Impedance:
1 kΩ
DC offset
Output voltage:
Range 1: -7.5...+7.5 V (open circuit)
Range 2: 0.75...+0.75 V (open circuit)
-Range 3: 75...+75 mV (open circuit)
Sweep (internal)
Setting of start and stop frequency
Internal sweep:
all waveforms
Sweep time:
linear, 20 ms to 100 s
continuous or triggered
(ext. signal, interface)
Amplitude Modulation:
Modulation via external signal
Modulations depth:
0 to 100 %
Bandwidth:
DC – 20 kHz (-3 dB)
Gate (asynchronuous)
Modulation on/off via external TTL signal
Delay time:
‹ 150 ns
Input singal:
TTL
Trigger Function (synchronuous)
Burst mode via ext. trigger input or interface
Frequency range:
‹ 500 kHz
Miscellaneous
Interface:
RS-232 (standard), IEEE-488 (optional)
or USB (optional)
Display:
16 characters, LCD with backlight
Memory:
for the last device settings and for
1 arbitrary signal
Safety Class:
Safety Class I (EN61010-1)
Power supply:
115/230 V ± 10 %; 50/60 Hz
Power consumption:
approx. 20 Watt
Operating temperature:
+10 °C to +40 °C
Max. rel. humidity:
10 % to 90 % (without condensation)
Dimensions (W x H x D):
285 x 75 x 365 mm
Weight:
approx. 5 kg
HM8150E/170408/ce
· Subject to alterations · © HAMEG Instruments GmbH · ® Registered Trademark · DQS-certified in accordance with DIN EN ISO 9001:2000, Reg.-No.: DE-071040 QM
HAMEG Instruments GmbH · Industriestr. 6 · D-63533 Mainhausen · Tel +49 (0) 6182 800 0 · Fax +49 (0) 6182 800 100 · www.hameg.com · info
@
hameg.com
A Rohde & Schwarz Company
w w w . h a m e g . c o m
