9
Änderungen vorbehalten
7. Application
7.1 Oscilloscopes
In combination with HMLab 0.60 or higher, the interface HO720
can be used via USB as well as RS-232. The HMLab “Settings“
must coincide with the interface settings.
If the present HMLab version is below 0.60 the current
version can be found in the Internet (www.hameg.com) for
downloading and updating your PC. The path is: Products
>
Oscilloscopes
>
(oscilloscope type)
>
Software/Firm-
ware (below the oscilloscope picture)
>
Software/Firmware
(below the oscilloscope picture)
>
HMLab.zip.
Programming commands
The programming commands list will be provided in the Internet
under www.hameg.com.
7.2 Spectrum analyzers
The interface HO720 can be used both over RS-232 and over USB
in connection with the user software AS300E. The „Settings“
preset in AS300E have to correspond to the interface used in
each case. You can load the current user software from www.
hameg.com from the Internet. They fi nd the software under:
Products
>
Spekrumanalysatoren
>
(Spekrumanalysatortyp)
>
software/fi rmware (under the illustration of the Spectrum
analyzers)
>
AS300E.zip.
Mainhausen, Germany
September 2006
A p p l i c a t i o n
