From left to right every set is made by:
16’
One octave below 8’ with repetition of first low octave.
5-1/3 A fifth over 8’
8’
Fundamental
4’
An octave above 8’
2-2/3 One octave and a fifth above 8’
2
Two octaves above 8’ with repetition of the last upper octave.
1-1/3 Two octaves and a third above 8’.
1-3/5 Two octaves and a fifth above 8’
1
Three octaves above 8’ with repetition of last 2 high octaves.
Pedal Board Drawbars
In the middle of the 4 drawbars set, you will find 2 brown drawbars that are
used for controlling the 32’ and 16’ when an external midi pedal board is
connected.
STORE PRESETS FUNCTION:
With EPS Technology you can easily save your own drawbars configuration
and recall when you want ( also after shut down ) by operate in this way:
Do your own drawbars configuration on the upper manual moving each
drawbar ( first set from the left ): when you reach the desired sound, choose
the preset key ( inverted coloured keys) where you want your sound to be
saved: press and hold keys for 4-5 seconds until the related LEDS will flash
one time.
Done! Now your sound is stored in that preset key. You can delete it by do
the operation described above another time.
For store presets on the lower manual do the same but using the third set
from the left.
For store and recall presets use only the inverted coloured keys from C# to
A. of both manuals.
EFFECTS
Percussion (6)
In the Upper manual with the B preset active, is it possible to activate the
percussion effect with the buttons set in the higher right part of the
instrument.
Perc. On/off:
Percussion on or percussion off.
Perc. Volume Soft/Norm. :
Two different volumes of percussion.
Perc. Decay :
Percussion decay Fast and Slow
Perc. Harmonic :
Harmonic of the percussion , II (second )
and III (third ).
