HAMICHORD FUNCTIONS
START THE MIDI CONTROLLER
In this state Hamichord can only talk to an external MIDI devices (sequencer, computer,
etc ) using the “midi out” socket; also the other midi sockets work. Once you connect the
AC plug, turn the on/off button to I (on): this operation will turn on the midi controller that
will be in full operation in 3-4 seconds; The system is ready when all of the four lights
above the drawbars are on. After this, the midi controller needs to be synchronized with
the hardware interface: the preset section hasn’t got the mechanical latch system, the
first thing to do before playing is to choose one preset or choose the drawbar sets by
pressing A# or B key on the lower and on the upper manual. The respective LEDs of the
drawbars set power up; drawbars set not active has got the LED off. If Hamichord Exp-
edition is connected you can turn-on it through the switch (1) you find on the upper right
End-block. When the system start the LED above the switch will light.
5)
5)
5)
5)
START-UP AND SHUT DOWN OF THE INSTRUMENT:
INSTRUCTIONS FOR USE.
