6
How to Use
Manual Setting
1. Make sure Blender is unplugged and Speed Dial is at .
2. Add ingredients to Blending Jar. Secure Lid onto Jar with tab over Blending Jar handle. Turn Speed Dial
clockwise to select (1–10) speed.
3. Plug into electrical socket.
4. Press Start/Stop button, or press Pulse button for a controlled consistency.
5. When mixture reaches desired consistency, press Start/Stop button.
6. Unplug from socket.
7. Remove Blending Jar from Base.
8. Remove Lid from Jar and pour into cups.
Program 1 (Hot Green Tea), 2 (Hot Oolong Tea), or 3 (Hot Black Tea)
1. Make sure Blender is unplugged and Speed Dial is at .
2. Place Brewing Tea Insert in Blending Jar and add tea bags to Insert. Do not use loose tea.
3. Add Blending Jar to Base and pour a minimum of 200 ml (maximum 300 ml) of hot water (95°C [203°F]
maximum temperature). Secure Lid onto Jar with tab over Blending Jar Handle.
4. Plug into electrical socket.
5. Turn Speed Dial counterclockwise to select desired Tea Program and press Start/Stop button. Blender will
automatically turn off when program is complete.
6. Unplug from socket.
7. Remove Lid and pull up on Brewing Tea Insert with tea bags to remove. Discard tea bags.
8. Pour tea into hot or cold cups.
NOTE: Follow directions for Programs 4 or 5 to add froth or cheese topping to drinks.
Program 4 (Frothing)
(uses Blending Jar 6126-351, sold separately)
1. Make sure Blender is unplugged and Speed Dial is at .
2. Add cold skim milk* (about 4°C [39°F]) to Blending Jar. Do not exceed maximum 300 ml of liquid in Blending Jar.
Secure Lid onto Jar with tab over Blending Jar handle.
3. Plug into electrical socket.
4. Turn Speed Dial to Program 4 and press Start/Stop button. Blender will automatically turn off when program is
complete.
5. Unplug from socket.
6. Remove Blending Jar from Base.
7. Remove Lid and spoon froth over top of drink.
* Cold skim milk is best for frothing.
Program 5 (Cheese Topping)
(uses Blending Jar 6126-351, sold separately)
1. Make sure Blender is unplugged and Speed Dial is at .
2. Add ingredients according to directions from cheese topping manufacturer. Do not exceed maximum 500 ml
of liquid in Blending Jar. Secure Lid onto Jar with tab over Blending Jar handle.
3. Plug into electrical socket.
4. Turn Speed Dial to Program 5 and press Start/Stop button. Blender will automatically turn off when program is
complete.
5. Unplug from socket.
6. Remove Blending Jar from Base.
7. Remove Lid and spoon topping over top of drink.
Program 6 (Smoothie)
1. Make sure Blender is unplugged and Speed Dial is at .
2. Add ingredients to Blending Jar. Secure Lid onto Jar with tab over Blending Jar handle.
3. Plug into electrical socket.
4. Turn Speed Dial to Program 6 and press Start/Stop button. Blender will automatically turn off when program is
complete.
5. Unplug from socket.
6. Remove Blending Jar from Base.
7. Remove Lid from Jar and pour into cups.
840337400 v13.indd 6
7/29/20 11:06 AM
