Hamilton Beach Commercial HMD0200, Operation Manual

1.

 Plug mixer into a grounded outlet.

2.

 Place the ingredients into the container. The 

basic milkshake recipe is:

  •  3 No. 24 scoops of ice cream
  •  4 ounces of very cold milk
 • 

1

1

⁄

2

 ounces of syrup

3.

 Select the desired speed using the 3-speed 

selector switch.

4.

 Position the container into 

the container guide and 
move the cup upward to 

automatically

 turn the 

motor on. Set the container 
down onto the cup rest. 

NOTE: 

You may also turn 

the motor ON and OFF 
using the pulse switch. 

5.

 When the drink is completely mixed, lift the 

container up off the cup rest and pull down 
from the container guide. The motor will turn off.

NOTE: 

Inspect agitator(s) daily. Replace 

agitator(s) every 90 days.

4

Mixing a Drink

You must read the “Mixer Safety” section before 
using the mixer.

For best mixing results, use the Hamilton Beach 
Universal Container (#110E). Do not use a paper 
cup. The container fits the container guide which 
starts the motor. 

Mixing a Drink

Operating the 

Mixer

Using the Container Rest

Two-Position Container Rest

The top container rest position is used when mixing 
with a standard container. In the top position, a 
standard container will fit into the container guide 
to lift the container guide pin against the actuator 
switch, allowing the motor to run. To turn off the 
motor, rest a standard container on the lower, 
or standby, container rest position.

The lower container rest position may also be used 
when mixing with larger containers, or for storing 
standard containers when the mixer is not in use.

NOTE:

 When container is not positioned as 

described above, you may also turn the motor on 
using the pulse switch.

w

WARNING

Cut Hazard

Always use metal container when mixing.

Do not put spoon or other utensils in metal 
container when mixing.

Failure to follow these instructions can 
result in cuts.

840145002_ENv02.indd   4

1/30/15   12:23 PM