background image

2

IMPORTANT SAFEGUARDS

1. 

Read all instructions.

2. 

This appliance is not intended for use by persons with 
reduced physical, sensory, or mental capabilities, or lack of 
experience and knowledge, unless they are closely supervised 
and instructed concerning use of the appliance by a person 
responsible for their safety.

3. 

This appliance should not be used by children. Keep the 
appliance and its cord out of reach of children. Children 
should be supervised to ensure that they do not play with the 
appliance. 

4. 

To protect against risk of electrical shock, do not immerse 
base, motor, cord, or plug in water or other liquid.

5. 

Unplug cord from outlet when not in use, before putting on or 
taking off parts, and before cleaning.

6. 

Avoid contacting moving parts.

7. 

Do not operate any appliance with a damaged supply cord or 
plug, or after the appliance malfunctions or has been dropped 
or damaged in any manner. Supply cord replacement and 
repairs must be conducted by the manufacturer, its service 
agent, or similarly qualified persons in order to avoid a hazard. 
Call the provided customer service number for information on 
examination, repair, or adjustment.

8. 

The use of attachments not recommended or sold by the 
appliance manufacturer may cause fire, electric shock, or 
injury.

9. 

Do not use your food processor if any part is broken.

10. 

Do not use appliance outdoors.

11. 

Do not let cord hang over edge of table or counter, or touch 
hot surfaces.

12. 

Keep hands and utensils away from moving blade and disc 
while processing food to reduce the risk of severe personal 
injury and/or damage to the food processor. A rubber scraper 
may be used but ONLY when the food processor is not 
running.

13. 

The blades and discs are sharp. Handle carefully during 
assembly, when emptying the bowl and during cleaning. Store 
out of reach of children.

14. 

To reduce the risk of injury, never place cutting blade or disc 
on base without first putting work bowl properly in place.

15. 

Be certain lid is securely locked in place before operating 
appliance.

16. 

Never feed food into food chute by hand. Always use the food 
pushers.

17. 

Do not attempt to defeat the lid interlock mechanism.

18. 

Make sure the blade or disc has come to a full stop before 
removing lid.

19. 

To reduce the risk of injury, be sure to insert or remove blade 
and disc using hubs provided for this purpose. Use caution 
when removing blade and disc from the work bowl, when 
emptying the work bowl, and when cleaning.

20. 

Check that controls are clear of objects and hands before 
plugging cord into wall outlet. To disconnect, press “STOP” 
( ); then remove plug from wall outlet.

21. 

Always use the pushers to clear the food chute. When 
this method is not possible, unplug cord from outlet and 
disassemble unit to remove the remaining food.

22. 

The appliance is not intended for commercial, professional, 
or industrial use. It is designed and built exclusively for 
household use only.

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or 
injury to persons, including the following:

Summary of Contents for 70825-TW

















































Reviews: