background image

 3

2

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following:

1. 

R

ead all instructions.

2. 

T

his appliance is not intended for use by persons with 

reduced physical, sensory, or mental capabilities, or lack 
of experience and knowledge, unless they are closely 
supervised and instructed concerning use of the appliance by 
a person responsible for their safety.

3. 

T

his appliance shall not be used by children. 

K

eep the 

appliance and its cord out of reach of children.

4. 

C

lose supervision is necessary when any appliance is used 

near children. 

C

hildren should be supervised to ensure that 

they do not play with the appliance.

5.

 T

o protect against risk of electrical shock, do not put cord, 

plug, base, or motor in water or other liquid.

6.

 T

urn the appliance OFF ( ), then unplug from outlet when 

not in use, before putting on or taking off parts, and before 
cleaning. 

T

o unplug, grasp the plug and pull from the outlet. 

Never pull from the power cord.

7. 

N

ormal operating cycle of appliance cycle is 2 minutes of 

on time. 

A

llow 1 minute off period between each maximum 

cycle.

8. 

A

void contact with moving parts.

9. 

D

o not operate any appliance with a damaged supply cord or 

plug, or after the appliance malfunctions or has been dropped 
or damaged in any manner. 

S

upply cord replacement and 

repairs must be conducted by the manufacturer, its service 
agent, or similarly qualified persons in order to avoid a 
hazard. 

C

all the provided customer service number for 

information on examination, repair, or adjustment.

10. 

T

he use of attachments, including canning jars, not 

recommended or sold by the appliance manufacturer may 
cause a risk of injury to persons.

11. 

D

o not use outdoors.

13. 

D

o not place on or near a hot gas or electric burner, or in a 

heated oven. 

14. 

K

eep hands and utensils out of the jar and away from the 

cutting blade, while blending or chopping food, to reduce 
the risk of severe personal injury and/or damage to the 
appliance or available attachments (attachments may not 
be provided with appliance). 

A

 rubber spatula may be 

used but must be used only when appliance is not running.

GB

15. 

B

lades are sharp; handle carefully— especially when 

cleaning inside jar.

16. 

D

o not use a broken, chipped, or cracked jar.

17. 

D

o not use broken, cracked, or loose cutting blade 

assembly.

18. 

A

lways operate appliance with lid in place. 

R

emove filler 

cap only for adding ingredients.

19. 

D

o not run a soup cycle unless appliance has fully cooled 

to room temperature.

20. 

W

hen blending hot liquids in the open top blender jar, 

remove center filler cap and close any edge lid opening 
intended for pouring. 

T

o prevent possible burns: Do not 

exceed the 2-cup (473-ml) level. 

H

ot liquids may push 

off lid during blending; therefore, with the protection of an 
oven mitt or thick towel, place one hand on top of the lid, 
keep exposed skin away from the lid, and start blending 
at lowest speed.

21. 

B

e careful if hot liquid is poured into the jar as it can be 

ejected out of the appliance due to sudden steaming.

22. 

D

o not leave appliance unattended while it is operating.

23. 

C

heck that the appliance is OFF ( ) before plugging  

cord into wall outlet. 

T

o disconnect, turn the control to  

OFF ( ); then remove plug from wall outlet. 

T

o unplug, 

grasp the plug and pull from the outlet. Never pull from 
the power cord.

24. 

D

o not use appliance for other than intended purpose.

25. 

K

eep hands and utensils, other than the tamper provided, 

out of container while blending to reduce the risk of 
severe injury to persons or damage to the blender. 

T

he 

cover must remain in place when using the tamper 
through the cover opening. 

A

 scraper may be used but 

must be used only when the blender is not running.

26. 

CAUTION!

 

I

n order to avoid a hazard due to 

inadvertent resetting of the thermal cut-off, this appliance 
must not be supplied through an external switching 
device, such as a timer, or connected to a circuit that is 
regularly switched on and off by the utility.

27. 

Y

our plug is provided with a 13-amp fuse approved 

by ASTA to B.S. 1362. 

I

f you need a replacement fuse 

carrier, it must be replaced with the same colour-coded 
carrier with the same markings. 

F

use covers and carriers 

can be obtained from approved service agents.

SAVE THESE INSTRUCTIONS

Summary of Contents for B96









Reviews: