6
w
WARNING
Laceration Hazard.
• Handle blade carefully; it is very sharp. Make sure unit is
switched to OFF ( ) and is unplugged.
• Always use food pusher to feed food into the chute. Never
push food through chute with hands or other objects.
1.
Place Bowl on Base with handle
facing the front. Carefully place
Chopping/Mixing Blade or Dough
Blade straight down onto Motor
Shaft.
2.
Add food to Bowl. Place Lid on
Bowl, raise Locking Arm up and
over, and snap in place. Plug into
outlet.
3.
Select High (HI) speed by turning
the Speed Dial to the right, or LO
speed by turning the Speed Dial to
the left.
NOTE: This Food Processor will
start in the speed it was last used.
4.
Press the ON/OFF (I/ ) Switch up to turn ON (I) Food
Processor. The Food Processor will run continuously at
the selected speed. Press Switch
down to turn OFF ( ).
5.
For more precise control, press
PULSE in short bursts, checking
progress frequently.
6.
When finished, switch to OFF ( ).
Unplug. Push Locking Arm back to
unlock Lid and lower Arm.
7.
Always remove Lid before removing Bowl to avoid
possible damage to the appliance.
NOTES:
• Operate using only one Blade or Disc at a time.
• High (HI) speed is recommended for most recipes using
the Chopping/Mixing Blade or Dough Blade.
• When chopping foods, pulsing on and off will produce
the best results.
• Make sure Food Pusher is in place while operating.
How to Use Chopping/Mixing Blade
or Dough Blade
PULSE
Summary of Contents for Stack & Snap 70815
Page 17: ...17 Notes...
