6
Placing the Water Tank on the Base
Lower the tank into place until it is
properly seated,
using the fan
enclosure and
the base to align
the tank.
IMPORTANT!
Never pour water into
or allow water to splash into air intake
or exhaust grilles.
NOTE:
Some water will flow out of
the tank and into the water tray when
the tank is in position.
CAUTION:
Once the humidifier has
been filled, do not attempt to tilt or
move it. If it is necessary to move
the humidifier, make sure it is
unplugged and remove the water
tank first.
Plugging in the Humidifier
WARNING: To reduce the risk of
electrical shock, never plug in the
humidifier while your hands are wet!
Once the humidifier has been assembled
and placed in its final location, and the
tank has been filled, plug the humidifier
into a wall outlet.
NOTE:
The polarized plug will only
fit in one direction—DO NOT try
to force the plug! If you are unable to
insert the plug into the outlet, try
reversing the plug. If the plug still does
not fit, contact a qualified electrician to
replace the obsolete outlet.
Setting the Controls
1. Fan Speed Knob
2. Power On Indicator –
lights
when unit is on.
Setting the fan speed
Turn the fan speed knob to the
desired setting. To increase the
humidity in a room more quickly, set
the knob to
HI
. For quiet, nighttime
operation or for a more gradual
increase, set the knob to Quietmist™
.
Indicator lights
The power on indicator will light to
indicate that the humidifier is on.
840117800 Ev00 8/27/03 11:14 AM Page 6
