■
It is dual temperature.The temperature can be convertible from Fridge to Freezer. Press the arrow keys to set
or adjust the temperature. When the temperature display is flashing, you can set the fridge temperature
between 0°C to 8°C (32°F to 46°F) and freezer temperature between -24°C to -14°C (-11°F to 7°F)
the recommended temperature setting is 3°C (37°F) and -18°C ( 0°F)
■
This function should be used when the appliance is flrst turned on, when it has been filled with
groceries or if the door has been open for an extended period. This function will run the compressor
constantly to reach the coldest temperature as quickly as possible.
Press and hold the fast freeze button for three seconds to activate the fast freeze. The LED indicator
will illuminate.
To cancel the fast freeze function press and hold the fast freeze button until the LED indicator turns off.
When the fast freeze cycle has finished or is canceled the appliance will revert back to the last
set temperature
■
To switch between °C and °F, press the °C/°F key, the corresponding indicator light will illuminate.
■
This appliance is equipped with a door alarm that will sound if the door is left open for more than 3
minutes. The alarm will beep and the display will flash continuously until the door is closed.
Temperature setting
：
:
Fast Freeze Function:
Switching Between °C and °F:
Door Ajar Alarm:
The appliance ships with the handle inside the cabinet. It must be installed by the end user. The appliance
should be unplugged before installing the handle.
1. Position the handle over the exposed door handle posts.
2. Insert screws into the handle bracket and tighten them with the provided allen key. Tighten until snug.
Note: The handle may look slightly different based on the colour of the appliance.
CONTROL PANEL
HANDLE INSTALLATION
Operating Instructions
4
5
