7
6
7.
Process food or beverages. Place hand on lid when
blending liquids. Push button on control panel to start
blender.
8.
ALWAYS turn blender off and wait until blades have
stopped rotating before removing jar.
9.
To remove jar after blending is complete, lift the jar
straight up. If it is not easily removed, rock gently and lift.
Do not twist.
10.
NEVER replace jar onto unit while motor is running.
How to Clean the Blender
1.
Unplug blender from electrical outlet.
2.
Wipe blender base, control panel, and cord with a damp
cloth or sponge. To remove stubborn spots, use a mild,
non-abrasive cleanser.
3.
To clean jar, unscrew jar nut and remove cutting blades
from jar.
4.
Carefully remove cutting blades from jar nut.
5.
Carefully wash blades, jar nut, jar (if plastic), and cover in
hot, soapy water. Rinse and dry thoroughly. Do not soak.
Do not wash blades, jar nut, plastic jar, or cover in a
dishwasher.
6.
Reassemble cutting blades onto jar, replace jar onto
blender base.
7.
Store blender with cover ajar to prevent container odor.
Before First Use
After unpacking the blender, wash everything except the
blender base in hot, soapy water. Dry thoroughly. Do not place
in dishwasher. Wipe the blender base with a damp cloth or
sponge. DO NOT IMMERSE THE BASE IN WATER. Care
should be taken when handling the blades as they are very
sharp.
How to Assemble and Use
IMPORTANT:
Your blender jar and cutting blades are subject
to wear during normal use. Always inspect jar for nicks, chips
or cracks. Always inspect cutting blades for broken, cracked
or loose blades. If jar or cutting blades are damaged, do
not use. Contact an authorized service facility to obtain
replacement parts.
1.
Make sure blender is unplugged. Place blender base on
clean, dry surface to keep foreign particles from being
pulled up into motor during operation.
2.
Place blades in jar nut. Screw jar onto the jar nut with
cutting blades.
3.
Make sure the jar nut is firmly screwed onto the jar. If not,
it may loosen later when motor is turned on.
4.
Set jar into place on blender base, making sure it is
securely seated. If not, gently rock the jar until seated.
5.
Plug cord into outlet.
6.
Put ingredients in jar, place lid on jar.
840144900 ENv02.qxd 1/4/06 4:36 PM Page 6
