15
How to Use Dough Blade
(cont.)
11
10
14
When finished, press STOP and
unplug.
9
Press KNEAD button and process
following your recipe.
Carefully remove blade from
motor shaft.
Push locking arm back to unsnap
and lower onto counter.
13
8
If the lights on the control panel
are flashing, then the food
processor is not assembled
correctly. Either the locking
arm is not in place or the large
food pusher is missing. When
all parts are properly installed,
the control panel lights will be lit
continuously. The unit is ready to
operate.
12
Remove lid.