4
How to Assemble the Mixer
IMPORTANT:
To remove or insert the Bowl or Attachments, the Mixer Head must
be raised and locked in the UP position.
1.
Make sure that Setting Control is set
to OFF and the Mixer is unplugged.
2.
Press the Mixer Release Button and
tilt the Mixer Head up.
3.
Place Bowl on bowl lock and turn
clockwise until Bowl is locked.
4.
Plug Mixer into electrical outlet.
To Remove:
1.
Make sure that Setting Control is set
to OFF and the Mixer is unplugged.
2.
Press the Mixer Release Button and
tilt the Mixer Head up.
3.
Turn Bowl counterclockwise to
unlock.
To Attach the Bowl
w
WARNING
Injury Hazard
Unplug mixer before inserting or removing beaters.
Unplug mixer before cleaning. Failure to do so can result in broken
bones or cuts.
1.
Make sure that the Setting Control
is set to OFF and the Mixer is
unplugged.
2.
Press the Mixer Release Button and
tilt the Mixer Head up.
3.
Insert Attachment onto Beater Shaft
and press upward as far as possible.
4.
Turn the Attachment to the right,
hooking beater over pin on shaft.
5.
Plug Mixer into electrical outlet.
To Attach the Beater, Wire Whisk, or Dough Hook
