4
How to Use
5
2
6
1
4
3
Turn CO
2
release knob counter-
clockwise (when viewed from
above) to unlock the cartridge
door. Press door to open.
NOTE:
Only use Fizzini
®
Hamilton Beach
®
CO
2
cartridges and bottles.
Never carbonate if bottle is empty, not filled to the Soda Fill Level, or
not fully attached.
Fill water up to MAX Fill Level
for Sparkling Water. For best
carbonation of soda, fill water to
Soda Fill Level.
Place carbonating unit onto bottle
and turn clockwise until it clicks
into place.
CAUTION!
Carbonating
unit may project off bottle if not
fully rotated and locked in place.
Insert CO
2
cartridge with the
narrow end pointing down. Swing
door closed and press to ensure it
is latched.
Turn carbonation adjustment dial
clockwise for more carbonation
and counterclockwise for less
carbonation.
Use VERY COLD (33°–42°F
[0.5°–5.5°C]) refrigerated water.
WARNING!
Explosion Hazard:
Dried flavor syrups can clog the
carbonation nozzle. Add flavors
after carbonation only. Do not
reinsert carbonating unit into
bottle with water after syrup has
been added.
Turn CO
2
release knob quickly
clockwise until it stops to release
gas into the bottle. If no CO
2
gas
is discharged into the bottle (if
no bubbles appear), press the
pressure release button to relieve
any trapped pressure in the
carbonating unit. DO NOT attempt
to remove the carbonating unit
from the bottle. Contact Hamilton
Beach for repair or replacement.
Sparkling Water/
MAX Fill Level
Soda Fill Level
840227400 ENv04.indd 4
840227400 ENv04.indd 4
5/15/13 8:25 AM
5/15/13 8:25 AM
