HOW TO FILL WITH WATER:
Make sure the iron is turned off and the power cord is unplugged from the electrical outlet.
1. Set the ‘Variable’ steam knob to the ‘0’ position before filling the iron with water.
2. Open the ‘Water Fill’ Opening and fill the Tank up to the ‘MAX’ Line on the tank.
3. The water level can be observed through the transparent part of the tank, when iron
is placed vertically. In case of water level becomes low, refill the tank, following the
procedure described in steps 1 to 3 above.
4. Pour out the remaining water after use.
3
HOW TO USE GUIDE
BEFORE FIRST USE:
NOTE: Most tap water can be used in this iron. Do not use water
additives or substitute water such as linen or scented
water in the steam iron, they can stain fabrics or damage
the iron. Do not fill the water more than the ‘MAX’
position.
MAIN FEATURES:
A. Steam regulating Knob
B. Burst steam button
C. Spraying button
D. Indicator light
E. Cord
F. Temperature regulating knob
G. Water tank
H. Ceramic Coating Soleplate
I.
Spraying mouth
J. Cover of water filler
K. Self-clean button
B
J
I
A
C
D
E
F
G
H
K
