Page 67 of 92
520008300 08/14
SmartServe™ Drink Mixers Service Manual
Removal and Replacement
14. Grasp both sides of the wash chamber cover (12) and gently pull the ends away from
the machine.
NOTE:
Cover back sides of wash chamber cover to avoid scratches/damage to side of
machine.
15. Slide the wash chamber cover (12) forward and rotate as shown.
16. Remove four screws (19) from wash chamber assembly (20).
12
12
20
19
17. Disconnect water line (21) from solenoid (22).
18. Remove the wash chamber assembly (20) from the machine and pull the sensor
harness (23) and water line (21) through the frame cavity.
21
22
23
21
20
To install the wash chamber assembly:
1. Feed the sensor harness (23) and water line (21) through the frame cavity and position
the wash chamber assembly (20) on the frame.
2. Connect water line (21) to the solenoid (22).
3. Install the wash chamber assembly (20) with four screws (19).
4. Slide the wash chamber cover (12) onto the machine and make sure the tab ends wrap
around the back of the machine.
NOTE:
Use food grade grease to ease the wash chamber cover back onto machine. Cover
back sides of wash chamber cover to avoid scratches/damage to side of machine.