background image

4

AudioStar™ 5050ULTRA

Connecting the Power

AC Power Operation 

Before connecting the unit to an AC outlet, check that the operating voltage of the unit is 

identical with the voltage of your local power supply.
Connect the supplied AC power cord to the AC socket at the back of unit. When the AC 

power cord is plugged in, the batteries are automatically disconnected.

Battery Operation 

This unit cannot be operated by battery when the AC power cord is connected. Open the 

battery cover and put the batteries as indicated inside the battery compartment.

Battery Precautions 

When using batteries in this device:
1.  Use only the size and type of batteries specified.
2.  Follow correct polarity when installing batteries as indicated in the battery 

compartment.

3.  Do not mix different types of batteries (e.g. Alkaline or Carbon-zinc) or old batteries 

with new ones.

4.  If the device is not to be used for a long period of time, remove batteries to prevent 

damage or injury from possible battery leakage.

5.  Do not try to recharge batteries that are not intended to be recharged; they can 

overheat and rupture (Follow battery manufacturer’s directions).

Installing the Remote Control Battery

1.  Remove the battery compartment cover on the 

back of the remote control by pushing the tab 

to the right while removing the cover.

2.  Insert a 3V lithium battery (CR2025 or 

equivalent) following the polarity (+) as shown 

on the diagram inside the compartment.

3.  Replace the battery compartment cover.

NOTE:

 The remote control battery normally lasts for about one year, although it depends 

on how often the remote control is used. If the remote control is not working properly, 

replace the battery. 

Precautions When Using Batteries

1.  CAUTION: There is a danger of explosion if battery is not inserted correctly. Replace 

only with the same or equivalent battery type.

2.  Do not mix different types of batteries together (e.g. alkaline, rechargeable and 

standard (carbon zinc) or old batteries with new ones.)

3.  Exhausted batteries must be removed to prevent possible leakage.
4.  Dispose batteries properly in accordance with environmental regulations in your 

region.

CR2025

PUSH

OPEN

Summary of Contents for 5050ULTRA













Reviews: