___
Hamilton/Buhl
11
Chapter 6. Operation Guide
1. Copy
It is important to make sure that your source disc is placed in the right drive. The default
source is your top drive. You can check or select your source reader by function
6. Select Source. (Please refer to page 13)
1. Select 1. Copy and place source disc and blank discs into the proper trays. Then the
system will detect the source disc and show the information.
2. Press
ENT
to start copy
3. Once the copy task is finished, the copied discs will be ejected and the result of copy
task will show on the LCD:
**Note:
Due to default setting of auto start time, the duplicator will start to copy automatically
within a few seconds. You can set “OFF” to close the auto start function or set a longer
waiting time. The default setting is 5 seconds. (For more info about this setting please
refer to 8-1. Auto Start Time, page 19)
If the HDD is selected to be the source, you have to load the source image to the built-in
HDD and then execute the Copy process. Please refer to 9-2 Disc to Image (Page 22)
for instructions on how to load from Disc to HDD.