6
Juke24
™
Portable Digital Jukebox
CD Playback:
After loading the disc, press the
button once, the first track / file on the CD will be played back. (For reading
/ playing back MP3 disc, the “MP3” icon will be displayed.)
NOTE:
Do not touch the lens of the CD player. If touched, the lens may be damaged and the CD player will not operate
properly. If there is no disc in the unit, “NO DISC” or “ERR” will be indicated on the display. If the CD cannot be
read, “BAD CD or ERR” will be indicated on the display.
Play / Pause Control:
To temporarily pause playback, press the
button. At the same time, the current elapsed track number, time
and the
indicator will be shown on the display. Press the
button again to resume playback.
Stop Playback:
To stop playback, press the button. The disc will cease to play. The total number of tracks and the play time
will be displayed.
Skip Track:
During playback, press the
or
button once to skip to the next or previous tracks.
Fast Forward and Backward Track Search:
During playback, press and hold the
or
button to search through the current track at high speed in
forward or backward directions. When the
or
button is released, normal playback speed will resume
immediately.
Sing-Along with CD:
During playback, plug the microphone into the MIC socket and turn on the microphone switch. This will enable
the sing-along function as the CD plays.
Repeat Playback Modes (Repeat 1 / Repeat All / Repeat Off):
• Repeat the Current Track:
During playback, press the
REPEAT MODE
button until the
REP 1
icon is displayed to select the current track /
file to be repeated. The selected track / file will be repeated continuously.
• Repeat All Tracks:
During playback, press the
REPEAT MODE
button until the
REP ALL
icon is displayed. All tracks / files on the
CD will be repeated continuously.
• Return to Normal Playback:
Press the
REPEAT MODE
button until the
REP OFF
icon is displayed. Normal playback will resume.
USB Operation
This unit is designed to play MP3 files on USB flash-drive devices. If the files on the USB device do not conform to
the standard, they may not play back properly.
1. Insert the USB flash-drive into the USB socket on the side of the unit.
2. Press the
SOURCE
button until
USB
is shown on the display.
3. After reading the USB flash-drive, the display will indicate the total number of files on the flash-drive.
USB Playback:
After reading the USB flash-drive, press the
button to play the files. Once the
button is pressed, the first
track / file will playback and the display will indicate the MP3 icon.
