Hamilton Safe Company
Kit for replacing LeFebure 612 includes 1/4" x 1" x 16-1/2" bar, template, extended mount, and trim collar (6" three sides).
Tools required: Hex wrench set, screwdrivers, 5/16" drill, 3/18-16 tap, welder, four clamps, two yard sticks.
Note before you begin disconnect all electric from old night depository.
Step #1:
Remove the four screws (two on each side) that hold the face trim and remove face trim.
Step #2:
Remove four screws from the door top channel, and remove channel.
Page 2 of 9