background image

Document #101-0038

    11

  11/08/06

The limited warranty for repair and service work is conditioned upon the following:

1.

 The subject equipment has not, in the Seller’s sole opinion, been subjected
to: accident, abuse, misuse, vandalism, civil disobedience, riots, acts of
God, natural disaster, acts of war or terrorism.

2.

The Seller shall not be liable for any expense incurred by Purchaser inciden-
tal to the repair or replacement of equipment and Purchaser shall assume full
responsibility for any freight or shipping charges.

3.

The coverage of this warranty shall not extend to expendable parts.

4.

Purchaser shall have a warranty registration card on file with Seller prior to
any claim in order for warranty protection to apply.

5.

No warranty coverage is applicable to any equipment used for currency
other than that specified at the time of the purchase.

6.

Seller expressly disclaims any warranty that counterfeit currency will not
activate said equipment.

7.

Seller expressly disclaims any warranty for any losses due to bill manipula-
tion or theft or loss of cash under any circumstances.

8.

No person or entity other than a factory trained representative or Hamilton
Manufacturing Corp. has performed or attempted to perform the subject
repair or service.

9.

Using equipment which has been serviced or repaired for anything other
than its intended or designed use such as downloading software applications
not certified by Seller will void the Limited Warranty Agreement. This
includes software/applications such as e-mail, spyware, screen savers,
viruses, worms, third party software, web search engines, cookies, spam,
desktop applications, games, web surfing, etc.

THIS AGREEMENT IS MADE WITH THE EXPRESS UNDERSTANDING THAT THERE ARE

NO IMPLIED WARRANTIES THAT THE EQUIPMENT SHALL BE MERCHANTABLE, OR THAT
THE GOODS SHALL BE FIT FOR ANY PARTICULAR PURPOSE. PURCHASER HEREBY AC-
KNOWLEDGES THAT IT IS NOT RELYING ON THE SELLER’S SKILL OR JUDGMENT TO SE-
LECT OR FURNISH EQUIPMENT SUITABLE FOR ANY PARTICULAR PURPOSE AND THAT
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THAT WHICH IS DESCRIBED HEREIN.

The Purchaser agrees that in no event will the Seller be liable for direct, indirect, or consequential

damages or for injury resulting from any defective or non-conforming new, repaired or serviced equipment, or
for any loss, damage or expense of any kind, including loss of profits, business interruption, loss of business
information or other pecuniary loss arising in connection with this Limited Warranty Agreement, or with the use
of, or inability to use the subject equipment regardless of Sellers knowledge of the possibility of the same.

Summary of Contents for ACW













Reviews: