INTERCHANGEABLE CANOPIES
(ADD ON CANOPIES)
The canopy versions for the Camborne range
are slab top stoves to which a low or high canopy
can be fitted after installation and are
interchangeable.
These are fitted as follows:
•To fit the interchangeable canopy (Fig. 19):
•Remove the front clamps.
•Tilt the canopy as shown in stage 1.
•Engage the rear clips and pull fully forward.
•Fit the front clamps and tighten.
•Fit the required blanking plates shown in stage 2.
Camborne Wood & Multifuel Stoves
19
INSTALLATION
Fig.19