background image

© Copyright 2006

This manual is furnished under license and may be used or copied only in accordance with the terms of such
license.

Except as permitted by such license, no part of this publication may be reproduced, stored in a retrieval sys-
tem, or transmitted, in any form or any means, electronic, mechanical, recording, or otherwise, including
translation to another language or format, without the prior written permission of Part.

The content of this manual is furnished for informational use only, is subject to change without notice, and
should not be construed as a commitment by Silent Power Electronics GmbH. Silent Power Electronics
GmbH assumes no responsibility or liability for any errors or inaccuracies that may appear in this book.

FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Operation of this equipment in a residential area is likely to cause interference in which case the user at his
or her own risk and expense will be required to correct the interferen--ce.

Declaration of Conformity
Silent Power Electronics GmbH declares that the HEXD3UTX Enclosure conforms to the following stan-
dards, in accordance with the provisions of the EC Directive 89/366/EEC: EN 55022 (CISPR 22:1985), Class
A.

Warranty
Silent Power Electronics GmbH warrants that this product will be free from defects in materials and workman-
ship for period of time specified on the product packaging. This limited warranty shell commence from the
date of purchase. Silent Power Electronics GmbH warranty is not transferable and is limited to the original
purchaser. If the product is found to be defective then, as your sole remedy and as the manufacturer's only
obligation, Silent Power Electronics GmbH will repair or replace the product . This warranty shall not apply to
products that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, normal
wear and tear or any condition other than what can be considered normal use.

This warranty is exclusive and is limited to HEXD3UTX Enclosure. This warranty shall not apply to prod-
ucts that have been subjected to abuse, misuse, abnormal electrical or environmental conditions, or any con-
dition other than what can be considered normal use.

Warranty Disclaimers
Silent Power Electronics GmbH makes no other warranties, express, implied or otherwise, regarding the LC-
PRO-35SN Enclosure, and specifically disclaims any warranty for merchantability or fitness for a particular
purpose.

The exclusion of implied warranties is not permitted in some states and the exclusions specified herein may
not apply to you. This warranty provides you with specific legal rights. There may be other rights that you
have which vary from state to state.

Limitation of Liability
The liability of Silent Power Electronics GmbH arising from this warranty and sale shall be limited to a refund
of the purchase price. In no event shall Silent Power Electronics GmbH be liable for costs of procurement of
substitute products or services, or for any lost profits, or for any consequential, incidental, direct or indirect
damages, however caused and on any theory of liability, arising from this warranty and sale. These limitations
shall apply not with standing any failure of essential purpose of any limited remedy.

2

Summary of Contents for HEXD3UTX






































Reviews: