Default settings
Please refer to the following default settings of the 3G Router.
This information along with the Wi-Fi password are also listed
on the back of the product and the inside label.
IP address
• IP address: 192.168.100.1
Web interface login
• Password: hamlet
Wi-Fi network name
• SSID: Hamlet-3G-xxxx
Turn ON/OFF the Router
• To turn on the device, press the power ON/OFF button more
than 5s until the Hamlet logo appears on the display.
• To turn off the device, press the power ON/OFF button more
than 5s until the "Power Off” message appears on the display.
Reset to factory default settings
If you need to reset the device to factory settings, follow these
steps:
1. Turn on the device.
2. Use a sharp object such as a paper clip to press and
hold the "Reset" button for about 5 seconds.
3. Release the "Reset" button and wait for the router to
restart.
4. The factory default settings will be restored so that
you can access the router from your Web browser
using the factory defaults.
Important
The reset to factory default settings procedure erase all of the
configuration settings saved on the router.
